Sunday, March 15, 2015

Cool Gel Electrophoresis Lab

Intro: 
During the lab, we take DNA samples containing combinations of restriction enzymes and run them through a gel electrophoresis. The overall goal of the lab is to analyze the DNA bands in the gel to approximate the sizes of the DNA fragments and being able to construct a plasmid map that correctly places enzymes in the appropriate location with respect to the gel's data. 

The Gel Process:
Once given a premade gel mold, we load our five DNA samples in 5 of the 6 slots after placing it in the water. The first slot contains Lambda which is the control DNA and is free of restriction enzymes. This will be our template for determining the sizes of the DNA fragments. The second slot is left empty. The third contains restriction enzyme PST1, the fourth contains PST1/ SSP1, the fifth contains PST1/ HPA1, and the final slot contains all three restriction enzymes. 
Once we let the process run and the DNA fragments run towards the positive end because they are negatively charged, we get a gel that looks like this. 
Using the lambda as the template, and using other people's gel for further measurement, we are able to accurately label the DNA fragments with the appropriate size. The smaller fragments are further from the starting point because they are smaller in size and can travel further than the larger fragments. We start to see pattern in each gel slot and all of the slots add up the the same number of base pairs, 4100 bp. With all of this data, we can now construct our plasmid map. 

Mapping the Plasmid:
After a good ol' round of gel electrophoresis, there's nothing better than mapping out your plasmid and its restriction enzyme cuts. Seriously though, pay attention because this is pretty slick. First we examine the second gel lane, which was cut up by none other than PstI. From this lane our circular DNA is cut into two pieces, approximately 600 and 3500 base pairs long when compared to the lambda pieces, which means that PstI, must have cut the plasmid twice as such...


Then we examine the third lane, wherein our friendly neighborhood plasmid was cut by both PstI and HpaI. We get fragments that are 600, 500, and 3000 base pairs long, which means that our 4100bp fragment from the second lane was cut into two pieces by HpaI. We get the following result...



Then we check out the fourth lane where we used PstI and SspI to cut the plasmid. We get fragments that are 600, 1300, and 2200 base pairs long, which means our 3000bp fragment from lane two was cut into two fragments by SspI. Here's our plasmid now...


Lastly, when we use all three restriction enzymes to cut up the plasmid at the same time, as in lane five, we get the following cuts...


So there you have it, a hypothetical outline of how our restriction enzymes work on our plasmids based on our gel electrophoresis. Next time you want to commit a crime, remember that technology like this is legit, and it gets people incarcerated on the regular.

Friday, February 27, 2015

Cool E. Coli Transformation Lab


You think you've seen it all when it comes to bacteria? Well you ain't seen nothing yet!
TADAAA! Now you have! Feast your eyes on this--antibiotic resistant, glow-in-the-dark E. Coli. Sounds safe, right? Right.

In this lab we used the process of genetic transformation, which entails inserting a plasmid (insertable gene) into an organism's DNA to modify its traits. Here's how we did it...

We used four pre-prepared agar plates with the following contents...
1: pGLO-/LB (control)
2: pGLO-/LB/amp (control) 
3: pGLO+/LB/amp
4: pGLO+/LB/amp/ara

pGLO was the plasmid that we added to the organism's genetic material. pGLO+ indicates the presence of the plasmid and pGLO- indicates its absence. LB stands for Luria Broth, which prepared the E. Coli cells for the "log phase" of reproduction. Amp stands for ampicillin, an antibiotic that's a relative of penicillin. Only the cells that received the pGLO plasmid would be able to survive the wrath of the ampicillin. Ara stands for arabinose sugar, which provided the materials necessary for the pGLO+ cells to make their fluorescent protein.


First we started off with 2 small tubes, one contained plus Pglo another contained minus Pglo. Then we put 250 micro liters of transformation solution into each tube. We then picked up some colonies of ecoli and put them in each test tube. Then we put each of the test tubes on ice. We then added plasmid DNA to the +Pglo tube but not the -Pglo. After, we incubated them on ice for 10 minutes. Then we put them in heated water in order to break the plasma membranes so the plasmid DNA can enter the cells. We then added some nutrient broth to each tube so that the colonies could grow. Then we took the solution out from each tube and placed them in the four agar plates. The agar plate with -Pglo and lb showed that anything can live on the plate, the agar plate with -Pglo lb amp showed that the antibiotic works. The other two plates served the purpose of showing that the plasmid DNA was actually transferred to the host.


These are the four agar plates we used to grow the ecoli on


Incubation of the two test tubes on ice

Heat shocking to destroy the cell membranes of the bacteria


Here you ca see that the bacteria transformation was succesful because they are fluorescing.

Here are our controls, as you can see the plate containing the amp had nothing grow in it, which was what we were expecting.

Our lab was succesful in transforming the ecoli and at the end we also measured the transformation efficiencies of the bacteria for each of our lab groups.

As you can see we all got around the same number which indicates that we did the experiment successfully. Our transformation rate was 3.125 x 10^2 


In order to calculate this rate you have to go through the steps outline in the picutre below. 




Sunday, February 15, 2015

Cool DNA Extraction Lab

Where do you come from? Where did you go? Where did you come from Cotton-eye Joe?

This is a mystery that has baffled the minds of scholars since the dawn of time. We don't know where Cotton-eye Joe went, but with the knowledge of the 21st century we know where he came from. 

DNA is what makes each and everyone of us unique. Handed down to us from our parents, it codes for every cell in our body. As a way to visualize DNA, we do a neat little activity involving strawberries, DNA extraction buffer (soapy salty water), and isopropyl alcohol.

We start by putting two strawberries in a ziploc bag and we crush them. What this does is allows the strawberry guts or cells to be exposed to the 10 ml of DNA extraction buffer that we add right afterwards. The soapy DNA extraction buffer, since it's part polar and part non polar, will take off the cell membrane on the cells inside the strawberry- exposing it's DNA. 

This was how the strawberry mix looked after the DNA extraction buffer and isopropyl alcohol was added. 

We then funnel out the strawberry soap mix. What this does is separate out the clumps of the strawberry from the DNA juice mix. 

Then we added Isopropyl alcohol. The alcohol in this experiment would cause the DNA to clump together into something we can extract. 

Picture of extracted Strawberry DNA.



Friday, December 26, 2014

Cool Mitosis Video

For all you youngin' who be strugglin' graspin' the stages of mitosis fear not! The four bros have made a video quickly going over each stage in a catchy tune

Wednesday, December 17, 2014

Cool Yeast lab

The purpose of this lab was to conduct a study on cell communication. We did this by observing yeast mate and produce schmoos. Over several time intervals we observed the yeast both on a liquid base (sterile water) as well as on a dry base (dry Petri dish). These two surfaces were done to observe the effect they have on cell communication and their chemical signals. 

We labeled three test tubes as either alpha, A or mixed and put in the yeast cells respectively in each of the test tubes. Then we put two milliliters of sterile water in each test tubes to simulate wet environments. Then we added an equal amount of broth in each test tube in order to sustain their life overnight.  Then we left them in an incubator for 24 hours. After the 24 hours had elapsed we put samples of each test tube on a microscope slide and then counted the amount of yeast present.  

Below are the pictures we have taken of the yeast after 24 hours have elapsed:

Mixed (82 yeast are present)

Alpha (86)

A type (40 yeast were present)

Then we waited an additional five minutes for each of the test tubes. Below are the pictures of each test tube at the first time interval (5 minutes)

Mixed (39 were present)

Alpha (43 schmoos were present)

A type (95 schmoos were present)

Then we an additional five minutes and let the yeast culture. 

Mixed (231 schmoos were present)

Alpha (40 schmoos were present)

A type (5 schmoos were present)
 
As demonstrated by this lab, under the wet conditions, the A-type yeast alone went from 40 to 95 to 5 yeast cells. The alpha type went from 86 to 43 to 40 cells, and the culture of both A-type and alpha type cells went from 82 to 39 to 231 cells. Now in retrospect this data tells us very little because the yeast cells in each of the three cultures tended to vary up and down drastically. This error can be attributed to the fact that when we counted each yeast cell, we counted them from a field of view in the microscope, but not only were we onto always sampling the culture from the same exact place in the liquid, we also had no way of looking at the culture in the same place under the microscope. Theoretically, however, all three of the cultures should have increased in size. A type and alpha type should have reproduced asexually when separate, and when mixed, they should have reproduced sexually and moreso.

We also performed similar procedures to grow the yeast cultures under dry conditions. Three cultures were taken from the original test tubes (again A-type, alpha, and mixed) and allowed to dry onto an agar plate in a Petri dish. Then, as time progressed, we sampled the cultures and observed them under microscopes to determine how growth had occurred. Our results are pictured below.

At the beginning of the procedure, our dry cultures started out with the following numbers of cells.

Then at the first time interval, our dry cultures had the following numbers of cells.

At the last time interval, our dry cultures had these final numbers of cells.

As with the cultures grown under wet conditions, the ones grown under dry conditions should also have grown in a similar manner. That is, A-type and alpha type grow asexually when separated and sexually when together, and when they grow sexually, growth is greater than when the grow asexually.

Based on the data from both the wet and dry cultures, we can conclude that yeast cells grow best sexually under dry conditions. This can be attributed to the means by which yeast cells sexually reproduce.

For ease of description, Let's consider A-type and alpha type yeast cells to be like opposite genders, almost like male and female. Each gender releases a pheromone that physically attracts the opposite gender. It does this because it behaves as a ligand that stimulates the cell to change its chape and develop a shmoo that grows toward the location from which the opposite pheromone is coming. In order for the shmoo projection to grow out, the yeast cell must completely change its cytoskeletal structure, which reveals the true power of singalling molecules to really get work done. The shmoo is projected in the direction from which the opposite pheromone was produced, and the rest of the cell follows the projection toward the source. This allows the a and alpha type cells to grow toward each other, in order that they might sexually reproduce. Sexual reproduction is much more favorable for the yeast cells than asexual reproduction because it produces twice the amount of each type of cells. 

Bearing all this in mind, when we say that the yeast cells grow best under dry conditions, it's because the dry environment (as opposed to the liquid one) conducts these pheromones more effectively. And this kind of makes sense if we use an analogy. Colognes, perfumes, and body sprays were developed as a means to attract people. They behave in a similar manner as the yeast cells' pheromones, albeit certainly not so drastically, much to the chagrin of companies like Old Spice and Axe. If we were to spray the aerosol into an empty bucket of air and into a full bucket of water, we can probably guess that the dry bucket of air would conduct the scent better than the full, wet one.

Therefore, these yeast cells demonstrate the behavior of singalling moelecules and receptors and just how important and powerful they can be.

Saturday, December 6, 2014

Cool Photosynthesis Lab

The main idea with chromotography paper is to be able to see the separation of pigments. In this case we are seeing the variety of pigments found in the chloroplast to see how it helps with photosynthesis. As seen below with the paper strip, we can see the wide variety of pigments being separated and then the pencil mark is there the solvent ends. The very bottom of the paper is a dark green color and as it progresses to the top it begins to get lighter and lighter. The dark green color can be concluded to be chloroplast-a which is the main pigment used to absorb every light except for green. That has a low Rf value compared to Carotene which has an Rf value of 1 because it flows along with the solvent. What factors can play a role in the distance travels can be based on the polarity of the pigment or even the intermolecular forces of the pigment. The more complex and stronger it in hydrogen bonds, then the harder it is to move along the strip. This concept is great to think about in term of thinking about why a plant needs off of these complex pigments in the chloroplast and how Rf and absorbance and relatively be related. It can be concluded that the lower the Rf, the higher the absorbance. The rest is to be seen in the following data and lab procedure. 



The relationship between absorbency and transmittance is important to understand photosynthesis. In order to calibrate the colorimeter we put regular tap water in a cuvette and zeroed the absorbance and transmittance values. This served as a baseline value for the rest of the solutions.  
This is a picture of the colorimeter that we used.

In order to find this relationship we put a 100% blue dye solution in cuvette and put it in a colorimeter to test the amount of light that absorbed and transmitted. 
This is a picture of the 100% blue dye solution for trial one. 

We then followed these same steps but instead of a 100% blue dye solution, we diluted it to 50%, 25%, 12.5%, 6.25%, 3.125% and again measured the absorbable and transmittance values. 

This is a data table of the values we have obtained. 

From this data table we can conclude that the values between absorbency and transmittance have an inverse relationship.

In the next part of the lab, we conducted trials with either boiled or unboiled chloroplasts (dead or living) and we controlled whether or not the solution was exposed to light or not. This was done in order to observe the effects of how changing these factors would effect the rate of photosynthesis. 

First we made five different test tubes with the following contents:

Test tube one with 1mL phosphate buffer, 4mL distilled water, and 3 drops of unboiled (alive) chloroplasts

Test tube two with 1 mL phosphate buffer, 3 mL distilled water, 1 mL DPIP, and 3 drops of unboiled (alive) chloroplasts

Test tube three with 1mL phosphate buffer, 3 mL distilled water, 1 mL DPIP, and 3 drops of unboiled (alive) chloroplasts 

Test tube four with 1 mL phosphate buffer, 3 mL distilled water, 1 mL DPIP, and 3 drops of boiled (dead) chloroplasts 

Test tube five with 1 mL phosphate buffer, 3 mL+3 drops of distilled water, and 1 mL DPIP


Then we poured the solutions into cuvettes for testing in ur colorimeter to test the change in their transmittance over time. 
Going from left to right, these are cuvettes  1 to 5 


The first cuvette was done in order to calibrate the colorimeter and set a baseline for comparison for the rest of the cuvettes. 

We exposed all the cuvettes to light using the 2 liter Erlenmeyer flask filled with water in front of a heat lamp so that heat wouldn't affect the chloroplasts, but only the light. To simulate dark reactions for cuvette two we wrapped the cuvette in aluminum foil. This prevented light from entering the cuvette. 

This is a picture of our heat lamp and Erlenmeyer flask set up. 


This is a data table of the values we have obtained. 

Unfortunately due to an error with the lab equipment, some of the data was not stored correctly and we could not retrieve it. 

However, in a later discussion of what our results should have been we found that all the cuvettes except the third one should have had steady transmittance. Cuvette three was the only one that should have increased transmittance since it had all the requirements for photosynthesis to occur. As photosynthesis progressed, DPIP would change from blue to colorless because the chloroplasts would reduce the DPIP. As DPIP changes from blue to colorless, the colorimeter perceives it as an increase in the solution's transmission of light. 

The function of DPIP in this experiment is to act as a primary electron acceptor. DPIP replaced P680 as an electron acceptor. The source of electrons for DPIP was the distilled water. 

The colorimeter measured the absorbence and transmittance of the solution in each cuvette.

The darkness doesn't allow for the light to excite the electrons so DPIP cannot be reduced and in turn cannot gain electrons. 

Boiling the chloroplasts kills them causing photosynthesis to not occur. Which means that DPIP cannot occur because there is nothing for it to accept. 

Live chloroplasts kept in the light will have photosynthesis occurring which means they give off electrons for DPIP to accept. As DPIP accepts electrons it's reduced and turns from blue to colorless, so it's transmittance increases. If there's no light, photosynthesis can't occur so there's no electrons for DPIP to accept so DPIP can't reduce which results in the color not changing, and so the transmittance doesn't change. 

The purpose of cuvette one was to serve as a calibration of the colorimeter and to tell the colorimeter what 100% transmittance looks like. 
Cuvette two deprived the chloroplasts of light. This shows us that deprivation of light hinders the rate of photosynthesis. 
Cuvette three contained all the necessary requirements for photosynthesis to occur, living chloroplasts and light. 
Cuvette four contained all the necessary requirements for photosynthesis to occur except living chloroplasts. This tells is that death of chloroplasts hinders photosynthesis. 
Cuvette five contained no chloroplasts which tells us that having no chloroplasts hinders photosynthesis.
Cuvette five specifically behaved as a double negative control to show that DPIP does not reduce on it's own. If it did reduce on its own, that that would reduce the reduction that photosynthesis contributed to DPIP. 

This labs shows us that photosynthesis occurs only when chloroplasts are alive and are exposed to light and transmittance and photosynthesis have a direct relationship. 




Wednesday, November 12, 2014

Cool Cellular Respiration Lab

In this lab, we measured the effect of various conditions (temperature and germination) on the cellular respiration of mung beans and peas. Cellular respiration occurs in living things according to the following formula: C6H12O6 + O2 = CO2 + H2O. Therefore, because O2 is in the reactants and CO2 is in the products, a decrease of the former and an increase of the latter indicates that cellular respiration is occurring. On the other hand, photosynthesis occurs in autotrophs according to the following formula: Light + CO2 + H2O = O2 + C6H12O6, so a decrease in CO2 and an increase in O2 indicates that photosynthesis is occurring.

In order to observe the effects of these various conditions on cellular respiration, we came up with several groups of peas and mung beans and used Vernier lab probes to create graphs of O2 and CO2 concentration. The groups were glass beads (used as a control group because no cellular respiration or photosynthesis should occur), non-germinating peas at room temperature, non-germinating mung beans at room temperature, germinating peas at room temperature, germinating mung beans at room temperature, germinating peas in ice water, and germinating mung beans in ice water.

We started things off with a control group for the experiment. This was done by placing glass beads in the container with the Verniers. The results show that there is no cellular respiration or photosynthesis going on since they are not living objects. The graph shows this by the straight constant line across the graph. There is an increasing slope but that is due to the Verniers adjusting to the conditions of the container. Overall, no increase or decrease in CO2 and O2 levels. 


In the first portion of the experiment, we tested the CO2 and O2 concentrations for the peas and mung beans at room temperature. 
Here are the results for the peas, with CO2 levels indicated by the red line and O2 indicated by the blue line.

And here are the results for the mung beans with O2 indicated by the red line and CO2 levels indicated by the blue line.

For both the peas and mung beans at room temperature, the O2 levels decreased and the CO2 levels increased, which means that for these plants at room temperature, cellular respiration was occurring. At what rate preceisely? For the peas, the CO2 concentration increased at a rate of .583 ppm/sec and the O2 decreased at a rate of .0002167%/sec. And for the mung beans, the CO2 concentration increased at a rate of .183 ppm/sec and the O2 decreased at a rate of 0.0002667%/sec. This tells us that cellulalar respiration occurred at a slightly faster rate in the peas than in the mung beans, and this makes sens, for the peas were larger and therefore have a greater surface area on which their stoma can open and close to facilitate the movement of CO2 and O2.

We then tested to see of the change in temperature of the peas and beans affected the levels of carbon dioxide and oxygen. First we soaked 25 peas in 100 milliliters of 9 degree celcius ice water  for ten minutes. 
Peas in ice water bath

Then we put the peas in the Vernier apparatus.

After ten minutes had elapsed this was how our data looked.
We then conducted the same procedures for mung beans. 

First by soaking 25 of them in the 9 degree celcius ice water for 10 minutes. 

Then placing them in the Vernier apparatus to measure the carbon dioxide and oxygen levels in the tank as 10 minutes elapse. 

Below is our data:

The conclusion that we can draw is that the chilled beans and peas both went through less cellular respiration. We can infer this because from the data we gathered from the probes, compared to the non chilled beans and peas earlier in this lab, the rate of carbon dioxide being produced is less and the amount of oxygen being used up is less. Carbon dioxide being one of the products of cellular respiration and oxygen being one of the compounds used up in cellular respiration. This explains how locations with colder climates experience less vegetation. In the case of no sunlight, cellular respiration kicks in, but as we have discovered in this lab, cellular respiration does not work well when subjected to colder environments. 


In this part of the experiment we tested dried mung beans and peas to test and see what type of reaction would occur. What we did was take 25 peas and 25 beans and put them in a container with O2 and CO2 sensors. We left them in there for ten minutes and then recorded the data and evaluated the graphs. 

In this picture we have the mung beans in a sealed container with the sensors.

Data we collected: 


These are graphs of the data that the sensors recoreded at room temperature




From this data we can tell that for dried mung beans the overall trend of O2 was decreasing and the overall trend of CO2 was increasing. In cellular respiration Oxygen is being absorbed and carbon dioxide is being released. The mung bean graph follows that trend and therefore we can conclude that the mung beans were preformed get cellular respiration.

In the peas graph the overall trend for O2 is increasing and the overall trend for CO2 is decreasing. This means that carbon dioxide is being absorbed and oxygen is being released. This pattern follows photosynthesis because carbon dioxide is absorbed and oxygen is released when water is split in order to feed electrons into the cytochrome complex.